Johnson Controls NEO Series Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 59

Johnson Controls NEO Series Скачать руководство пользователя страница 38

User Manual: NEO System

38

Rev.0.3

3.5.9 Advanced Options, System

Figure 40 - System's Advanced Options Window

a)

System’s Equipment List Buttons

The left side of the windows will show the current equipment present in the system. If the

progress indicator is present (see 2.2.6) use the scroll control to display the remaining

equipment units available. Select the desired button in the list of items to show its

information. A selection band will appear in the selected item.

b)

System Identifier

In this section, you will find information of the equipment related to the system. First, there

is the name or identifier of the equipment, followed by the serial number associated with it.

Below, is the version of the equipment's operating system, followed by the version of the

application firmware which is installed. To upgrade the firmware, the configuration

software must be used.

c)

Location Identifier

This area shows the information of the physical location of the equipment, previously

introduced in the configuration software.

d)

Current Network Settings

Shows the current network configuration of the equipment.

e)

Factory Reset

ATTENTION: This button can perform a factory reset of the equipment. When pressed it will

indicate that all settings will be reset to default and the user can Confirm or Abort

.

f) Network Configuration Button

The network configuration button enters into the equipment's network configuration menu.

NOTE: The

OK

button present in the numbers keyboard, as shown in the following picture, must

be pressed in order to save changes in the configuration.

«
...
36
37
38
39
40
...
»

Содержание NEO Series




























































Отзывы:

Нет отзывов