Johnson Controls Kantech tyco ioSmart, Руководство по установке

Страница: 22 / 46

LED status bar
The LED status bar indicates various access conditions to the user. The following table lists the
default LED colors and the statuses that they indicate.
Table 11: LED status bar
LED color Status
Red Locked
Green Unlocked
Blue Keypad press
Yellow Warning: tamper alarm, low power, or locking device issue.
Note: In RS-485 mode, the reader supports up to eight status colors that you can customize in
EntraPass.
Optical tamper
For tamper security, a light reflective sensor on the reader detects a reflective part on the mounting
plate. Tamper detection initiates if the reader separates from the mounting plate by more than
5 mm. To mount directly to a wall, use a detachable bracket. In this position, tamper detection
initiates if the whole assembly separates from the wall.
The security-enhancing optical tamper is available in RS-485 mode and in Wiegand mode. In
Wiegand mode, for firmware 1.04 and higher, you must activate the optical tamper feature for the
KT-400 and the KT-1 controllers to support it. To activate the optical tamper feature, see mode 8 in
Table 22.
ioSmart Card Reader Installation Guide 22