Johnson Controls JHKF09ZEEBXFORX Скачать руководство пользователя страница 57

Страница: 57 / 64

7-3 Troubleshooting for Normal Malfunction

➢

The Foremost Inspecting Items

①

The input voltage must be 10% tolerance of the rated Voltage. If it is not

the case, the air-conditioner will probably not work normally.

②

Check the connecting cord between indoor unit and outdoor unit to see if it is

properly connected. The connecting must be done according to the wiring diagram,

please also notice that even different models may have the connecting cord of the

same specification. Please check if the marks at the connecting terminal and the marks

on the cord can match, otherwise, the air-conditioner will not work normally.

③

If the following phenomena are found, the problem is not from the air-conditioner

itself.

NO.

Problems

Causes

The motor is heard operating but

the air-conditioner does not work

when the indoor unit is powered on

Since the air-conditioner is powered on,

it will come to working condition as

long as you press the ON/OFF button of

the remote control and the Signal is well

received.

The compressor stops running but

the indoor fan motor keeps

working when it is at cooling mode

with the indoor temperature higher

than set temperature.

If you turn off the air-conditioner and

restart it immediately, it will return to

normal in 3 minutes, after that, the air-

conditioner will automatically adjust the

indoor fan speed to what you set.

The compressor works

discontinuously at dehumidifying

mode.

The air-conditioner will automatically

control the working of the compressor

according to the inside temperature.

The air-conditioner does not work

while the LED display is on.

The TIMER is set with the A/C; it will

be in hold on condition. If the TIMER

setting is cancelled, the air-conditioner

will return to normal working condition.

The compressor works

discontinuously at cooling and

dehumidifying mode, and the

indoor fan motor slows down.

The compressor stops internally or the

fan motor slows down to prevent the

indoor heat exchanger from being

frozen.

Содержание JHKF09ZEEBXFORX

































































Результаты поиска

Содержание JHKF09ZEEBXFORX

Отзывы:

Похожие инструкции для JHKF09ZEEBXFORX

Бренды по названию

Популярные бренды

Johnson Controls JHKF09ZEEBXFORX, Руководство пользователя

Результаты поиска

Содержание JHKF09ZEEBXFORX

Отзывы:

Похожие инструкции для JHKF09ZEEBXFORX

Бренды по названию

Популярные бренды