6
4.
“iFeel” button
When it displays "iFeel" button:
Press this button can be used to set the feeling function. The LCD shows the actual
room temperature when the function set and it shows the setting temperature when the
function cancelled. This function is invalid when the appliance at the Fan mode.
5.
“TURBO” button
Only under the state of cooling or heating mode, press this button, the fan speed is
adjusted to strong auto-maticlly and the LCD displays “TURBO” the “TURBO”
function is started to reach the highest cooling or heating.
6.
“TIMER” button
Setting the "ON" timer time:
a.
When remote controller is at off state, press "TIMER" button the LCD
displays ”TIMER ON" and the timer time ,the range of setting time is O.5h to 24h.
b.
You can press the “ ” or “ ” button to adjust the timer time, each touch will be
set time to increase or reduce O.5h before 10 hours ago, after ten hours will be set
time to increase or reduce 1h per pressing to enables your required timer.
c.
Press “TIMER” button again, to set the timer on function.
d.
You can set another function to insure the suitable state after air conditioner turn on
(including mode temperature swing fan speed and etc). The LCD will displays all
your setting and keep it when the timer reach to the set time, the air conditioner will
be working according to your set automatically.
Setting the “OFF” timer time:
a.
When remote controller is at on state, press “TIMER” button the LCD displays
“TIMER OFF” and the timer time, the range of setting time is O.5h to 24h.
b.
You can press the“ ”or “ ” button to adjust the timer time each touch will be
set time to increase or reduce O.5h before 10 hours ago, after ten hours will be set
time to increase or reduce 1h per pressing, to enable your required timer.
c.
Press "TIMER" button again, to set the timer off function.
7.
“DISPLAY” button
You can let the LCD display working or not by pressing this button.
8.
“ ” or “
” bu
t
ton
Press the “ ”or “ ” button, you can set the temperature range from 16
℃
to 32
℃
,
display will change when you touch the button.
9.
"iClean" button
a.
When remote controller is at the off state, press "iClean" button, the wind guiding
bars turn to initial positions for cooling, the A/C runs "iClean" function with max
duration 35mins.The purpose of this function is to clean dust on evaporator and dry
the inside water of evaporator and to prevent the evaporator going moldy due to water
deposition and boasting strange smell.
