Johnson Controls FAC2611-0U, Руководство по установке, Страница: 4 / 25

Figure 3: FAC2611 Physical Features
Table 1: FAC2611 Physical Features
Physical Feature: Description and References Callout
Binary Output (BO) Source Power Selection Jumpers: Position jumpers to select internal or external 24 VAC
supply power for Binary Outputs. (see
Binary Output (BO) Source Power Selection Jumpers )
1
Device Address DIP Switch Block (see Setting the Device Addresses ) 2
Mounting Clips (see Mounting ) 3
Configurable Outputs (CO) Terminal Block: Can be defined as Voltage Analog Output (0-10 VDC) or Binary Output
(24 VAC Triac). (see
Table 3 )
4
Analog Output (AO) Terminal Block: Can be defined as Voltage Analog Output (0-10 VDC) Current Analog Output
(4-20 mA). (see
Table 3 )
5
24 VAC, Class 2 Supply Power Terminal Block (see Supply Power Terminal Block ) 6
Cover Lift Tab (see Removing the Controller Cover ) 7
Field Controller (FC) Bus Terminal Block (see FC Bus Terminal Block ) 8
Sensor Actuator (SA) Bus Terminal Block (see SA Bus Terminal Block ) 9
Sensor Port: (SA Bus) RJ-12 6-Pin Modular Jack (see Sensor Port ) 10
Binary Input (BI) Terminal Block: Dry Contact Maintained or Pulse Counter/Accumulator Mode (see Table 3 ) 11
Universal Inputs (UI) Terminal Block: Can be defined as Voltage Analog Input (0-10 VDC), Current Analog Input
(4-20 mA), Resistive Analog Inputs (0-600k ohm), or Dry Contact Binary Input. (see
Table 3 )
12
End-of-Line (EOL) Switch, located under the cover. (see Setting the End-of-Line (EOL) Switch ) 13
LED Status Indicators (see Table 8 ) 14
FC Bus Port (RJ-12 6-pin Modular Jack) (see FC Bus Port ) 15
Binary Outputs (BO) Terminal Block: 24 VAC Triac (see Table 3 ) 16
4 FAC2611-0U Advanced Application Field Equipment Controller Installation Instructions