Johnson Controls AD-1272 Скачать руководство пользователя страница 38

Страница: 38 / 48

AD-1272 Advanced Thermal Dispersion Probe Airflow Measuring System Technical Bulletin

Enable, Disable, and Change the Supervisor PIN

The Enable Supervisor PIN and Change Supervisor PIN menu options are used to enable or disable the
Supervisor Menu PIN and change the current PIN.

Note:

The PIN is not set or enabled on a device with factory-default settings.

Note:

If the Enable Supervisor PIN option is selected, the Supervisor Menu can only be accessed with a PIN.

To enable or disable the PIN:

1. Enter the Enable Supervisor PIN submenu.

2. Press

UP or DOWN

to choose Yes to enable the PIN or No to disable the PIN.

3. Press

ENTER

to confirm the selection.

To update the PIN:

1. Enter the

Change Supervisor PIN

submenu.

2. Press

UP or DOWN

to scroll to display the numbers 0 through 9.

3. When the correct number is displayed, press

ENTER

to select the digit. The cursor automatically moves to the

next position. If an error is made after pressing ENTER, press ESC to return to the previous digit.

4. Enter the last digit and press

ENTER

to store the PIN number. The display returns to the Supervisor Menu

submenu display. Alternatively, press ESC to return to the Supervisor Menu without updating the PIN.

Note:

If the PIN settings are enabled, the PIN number must be entered each time the Supervisor Menu is
entered.

Factory Default
(Factory Default)

Restores the device to the factory-default settings. Any previous settings made in the

Operator and Supervisor Menus are reset including dimensions, the Operator PIN, and

custom text.

Exit Supervisor Menu
(Exit Supv Menu)

Returns the display to normal operation.

Table 17: Supervisor Menu Submenus (Part 2 of 2)

Supervisor Menu
Submenus (Actual
Display Name)

Description

Figure 65: Supervisor PIN Flowchart

Selected Submenu

*Default values shown

Normal Display

Enable Supervisor
PIN

Change Supervisor
PIN

ENTER

ESC or ENTER

ENTER

ESC or ENTER

DOWN

Submenu Selection Display

Содержание AD-1272

















































Результаты поиска

Содержание AD-1272

Отзывы:

Johnson Controls AD-1272, Технический бюллетень, Страница: 38 / 48

Результаты поиска

Содержание AD-1272

Отзывы: