Johnson & Johnson ETHICON ENDO-SURGERY HARMONIC 300, Руководство по обслуживанию

Страница: 64 / 80

62 GEN04
Service Manual
Date of Manufacture The date of manufacture may be determined by viewing the serial
number on the rear panel of the generator.The fourth and fifth
characters indicate the year of manufacture as follows:
GN401 = year 2001
GN402 = year 2002
GN403 = year 2003
GN404 = year 2004
GN405 = year 2005
GN406 = year 2006
GN407 = year 2007
Power Cord The GEN04 is supplied with a North American removable
power cord set
with the following characteristics:
Plug Style: NEMA 5-15 (clear) North American Hospital Grade
Receptacle: IEC 60320 C13 with straight non-angled cord entry
Cord Length: 4.6 meters nominal
Current Rating: 13A
Voltage Rating: 125 VAC minimum
Wiring Code: North American
Cordage Description: SJT (UL) or SJT (CSA)
Conductors: 16 AWG 3C
Agency Approvals Required: UL and CSA
If an International power cord is required, the user should
select a removable power cord set
with the following
characteristics:
Plug Style: as needed by particular country requirements
Receptacle: IEC 60320 C13 with straight non-angled cord entry
Cord Length: 2.44 - 4.6 meters nominal
Current Rating: 10A
Minimum conductor size cross-sectional area: 1.0 mm
2
copper
Voltage Rating: 250 VAC minimum
Wiring: international
Cordage Type: HAR
Item to have certification by at least one of the following agencies:VDE,
ASTA, SEMKO, KEMA, LCIE, DFT, IMQ, SEV
Duty Cycle Duty Cycle is determined by hand piece and instrument in use. For duty
cycle information, refer to applicable instrument(s) and hand piece
inserts and/or Chapter 7 – Warnings and Precautions of the Generator
300 System User Manual.
Weight Generator: 7.48 kg nominal
(unpacked)
Cart: 42.0 kg nominal
Overall Dimensions Generator 300 (HxWxD): 5.3” (13 cm) x 14.5” (37 cm) x 15.2” (39
cm)
Cart (HxWxD): 37.3” (95 cm) x 17.7” (45 cm) x 27.6” (70 cm),
including handle
Disposal Some internal components of the generator, foot switch and foot switch
cable contain lead. Disposal should be performed according to local
requirements and regulations.