The MEDSTREAM Programmable Infusion System is intended for
the intrathecal delivery of selected drugs for pain management or
spasticity management.
The implantable components of the system
include the infusion pump, pump catheter, connector and strain-relief
sleeve. The accessories needed to prepare the pump for implantation are
included with the pump in the O.R. prep kit.
The pump must be connected to a suitable intraspinal catheter.
The following intraspinal catheters are designed for use with the
MEDSTREAM pump:
CODMAN
®
Intraspinal Catheter Kit
SURESTREAM
™
Intraspinal Catheter Kit
This guide covers the implantation of the SURESTREAM
™
Intraspinal
Catheter. For instructions on implantation of the CODMAN
®
Intraspinal Catheter, please refer to its instructions for use.
The MEDSTREAM Control Unit is an external part of the system that is
required to prepare the pump for implantation, and to program the daily
dosage postoperatively. The control unit uses radio frequency to create
two-way communication with the pump. It is used to retrieve status
information from and transmit programming changes to the pump.
The control unit also must be used each time the reservoir is refilled.
CAUTION:
Do not implant the MEDSTREAM Pump without ensuring
a thorough familiarity with the information contained in this manual,
the Control Unit instructions and the MEDSTREAM Programming Guide.
CONSULTING PHYSICIANS
Robert M. Levy, MD, PhD
Neurological Surgery
Northwestern University Hospital
Chicago, IL
Timothy R. Deer, MD
Anesthesiology, Pain Medicine
Center for Pain Relief
Charleston, WV
492192.QX7:Layout 1 4/14/09 4:08 PM Page 3
