John Lewis JLFSEC612, Руководство пользователя

Страница: 40 / 52

Troubleshooting
Warning! Refer to Safety
chapters.
What to do if...
Problem Possible cause Remedy
You cannot activate the appliance. The appliance is not connected to
an electrical supply or it is connec-
ted incorrectly. Check if the appliance is correctly
connected to the electrical supply.
You cannot activate the appliance. The fuse is blown. Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
You cannot activate or operate the
hob. You touched 2 or more sensor
fields at the same time. Touch only one sensor field.
You cannot activate or operate the
hob. STOP+GO function operates. Refer to "Hob - Daily use" chapter.
You cannot activate or operate the
hob. There is water or fat stains on the
control panel. Clean the control panel.
An acoustic signal sounds and the
hob deactivates.
An acoustic signal sounds when the
hob is deactivated. You put something on one or more
sensor fields. Remove the object from the sensor
fields.
The hob deactivates. You put something on the sensor
field
.
Remove the object from the sensor
field.
Residual heat indicator does not
come on. The zone is not hot because it op-
erated only for a short time. If the zone operated sufficiently
long to be hot, speak to an Author-
ised Service Centre.
Automatic Heat Up function does
not operate. The zone is hot. Let the zone become sufficiently
cool.
Cooker User Manual 40