Johannus LiVE 2T-A, Руководство пользователя, Страница: 31 / 54

User Manual LiVE 2T-A / LiVE 3T-A (AGO) 32
5.5.2 Datadump
The Datadump function saves several settings from the organ to a USB storage
medium (for example a USB-stick).
Settings to send are: the content of all capture memory locations and all settings
which can be set via the Johannus Menu, except Key Volumes. Key Volume
settings are a part of the intonation data. These data can be received with the
optional Johannus Intonat software.
a. Saving data from the organ
1.
Press the MENU-piston.
2. Use the - and + pistons to select the
Organ Settings
function on the
display.
3. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
4. Use the - and + pistons to select the
Datadump
function on the display.
5. Press the ENTER-piston. The Datadump menu appears on the display.
6. Use the - and + pistons to select the
Save datadump
function.
7. Make sure the desired storage medium, the USB-stick for example, is
properly connected.
8. Press the ENTER-piston. When data is being sent,
Busy...
appears on the
display.
9. If the data dump is complete, the Datadump menu appears on the display.
10. Press the MENU-piston three times to exit the Johannus Menu.
b. Uploading data to the organ
1. Follow the steps 1 to 5 as described above at a. Saving data from the organ.
2. Use the - and + pistons to select the
Load datadump
function.
3. Make sure the desired storage medium, the USB-stick for example, is
properly connected.
4. Press the ENTER-piston. When data is being sent,
Busy...
appears on the
display.
5. After the text
Uploading successful
and
Reboot the organ
turn the organ off and on again.
Do not use the organ when the
Busy...
text is on the display.
Make sure to upload only data files which are recorded from the
instrument concerned. Uploading a data file from another instrument may
jeopardize the functioning of your instrument.
It is possible that there is already a file present. You will be asked whether
the file should be overwritten. Use the - and + pistons to select the
function, then press the ENTER-piston to confirm.