Johannus LiVE 2T-A, Руководство пользователя, Страница: 25 / 54

User Manual LiVE 2T-A / LiVE 3T-A (AGO) 26
4.9 Crescendo pedal
The crescendo pedal can be used to activate 20 (programmable) registrations
step-by-step. These registrations start with very quiet (pianissimo) to very loud
(tutti). The default registrations of the 20 steps can be changed. See § 5.5.1
Crescendo.
Activating the crescendo pedal
If the crescendo pedal is not activated it is indicated
on the displays with
Cresc: Off
.
Use the CR-piston to activate the crescendo pedal.
The display indicates the current step.
Crescendo pedal as additional swell pedal
The crescendo pedal can also be configured as a swell pedal see § 5.5.3 Expression
Pedals. If the crescendo pedal is set as additional swell pedal, all functions of the
original crescendo pedal are deactivated.
4.10 Quick Access
Quick Access is a function to quickly access certain functions of the organ.
4.10.1 Programming mode crescendo pedal
With the SEQ-piston a sequential step-by-step, previous or next, memory
locations can be selected:
- Pressing a piston of the capture memory locations Pedal will select the previous
General memory location.
- Pressing a piston of the capture memory locations General will select the next
General memory location.
The illuminated memory SEQ-piston together with the capture memory level
(shown in the display) indicate the selected location.
While the sequence function is active (by illuminated memory SEQ-piston), the
normal function of the capture memory locations pistons is disabled.
Utrecht, Bätz
Location Organ Console
───────────────────────────
Mem : 1 █
Trans : -1 █
Tune : 406,8Hz █
Temp : Original █
Cresc : Off II
Utrecht, Bätz
Location Organ Console
───────────────────────────
Mem : 1 █
Trans : -1 █
Tune : 406,8Hz █
Temp : Original █
Cresc : 0
II