background image

 

 

User Manual LiVE 2T-A / LiVE 3T-A (AGO) 

24 

 

It is advisable not to use the Manual Bass while playing the pedal board to avoid 
double bass tones. 

If no expression pedal is configured as a swell pedal for Manual II, 
the S/S-piston cannot be activated. 

 

 

 
 
 
Reeds Off (RO): 
Reeds Off is a function to switch off all reed stops simultaneously. As long as this 
piston is pressed, no reed stops can be activated. When this function is switched 
off, the reed stops that were on are activated again. Activate the Reeds Off with 
the RO-piston. 
 
Crescendo (CR): 
Crescendo is a function to activate and de-activate the Crescendo Pedal. If no 
expression pedal is configured as crescendo pedal, the CR-piston cannot be 
activated. See § 4.10 Crescendo Pedal. 
 
Manual Bass (MB): 
Couples the Pedal monophonic to Manual I. Only the lowest key that is played on 
Manual I is coupled from the Pedal to Manual I. 
If only the lowest key of a chord is released, the pedal key activated by the 
Manual Bass function is dropped until a new lowest key is played.  
Activate the Manual Bass with the MB-piston. 
 
 

 

 
 
 
Cantus Firmus (CF):

  

Cantus firmus: Latin for ‘fixed voice’ or in organs ‘solo voice’ or ‘melody coupler’. 
Couples Manual II monophonic to Manual I. Only the highest key that is played on 
Manual I is coupled from Manual II to Manual I. 
With use of a solo registration on Manual II in this way a solo is heard while 
playing only on Manual I. 
If only the highest key of a chord is released, the key activated by the Cantus 
Firmus function is dropped until a new highest key is played.  
Activate the Cantus Firmus with the CF-piston. 
 

 

 

Transposer (TRANS.): 
The Transposer function shifts the pitch by half-tone 
increments (from -8 to +8). The transposer setting can 
be read on the display (

Trans: …

). 

 
1.  Press the TRANS.-piston.  
2.  Use the - and + pistons to set the pitch. 
3.  When the transposer change needs to be saved, 

press the ENTER-piston while the TRANS.-piston is illuminated. 

It is advisable not to use the Cantus Firmus in combination with the coupler II-I 
because this overrules the solo function of the Cantus Firmus. 

Utrecht, Bätz 

Location Organ Console 

─────────────────────────── 

Mem  : 1          █  

 

Trans : -1   

      █  

 

Tune  : 406,8Hz    █  

 

Temp  : Original   █  

 

Cresc : Off         II

 

 

 

Содержание LiVE 2T-A























































Отзывы: