Lescheider Weg 6-8 • D-53773 Hennef-Bierth • Tel. +49 2248 9173-0 • Fax -79 • www.kunststoff-mueller.de
27/36
Visual and basic checks (annual)
12
Fan basic checks must be carried out by Joh. Mueller Kunststoff GmbH and this documented.
After basic cleaning the fan must be recommissioned in compliance with Chapter .
13
Check earthing point conductivity.
Motor maintenance
14
See motor operating instructions.
Table 6 : Maintenance and service work and intervals.
The operator can adjust these intervals to allow for the level of contamination.
12.3 Repair
For safety reasons the fan may only be repaired using original spare parts and in
agreement with Joh. Mueller Kunststoff GmbH.
The spare parts can be identified on the basis of the type plate data or the technical documentation.
Consult the customer service department of Joh. Mueller Kunststoff GmbH on the subject if necessary.
The fan must be recommissioned in compliance with Chapter 0 after repair.
13 Warranty
We cannot accept any liability whatsoever for damage due to not adhering to the foregoing
instructions.
