Lescheider Weg 6-8 • D-53773 Hennef-Bierth • Tel. +49 2248 9173-0 • Fax -79 • www.kunststoff-mueller.de
19/36
Type plate and warnings must always be legible. If it is ascertained during maintenance that
they are illegible or missing then they must be cleaned or replaced.
Type plate data for the radial fan supplied is given in Appendix A6.
7.7
Electricity supply
A terminal box or maintenance switch can be supplied to connect the fan to the electricity supply as
desired. A maintenance switch can be provided to switch the fan electrically dead when carrying out
maintenance and repair work (see scope of delivery in Appendix A6.
8
Planning use
8.1
Transport
Joh. Mueller radial fans are supplied pre-assembled in sealed foil packaging on a pallet ex works.
Vibration dampeners are pre-installed if supplied.
Check on receipt of the goods whether the fan/s has/have suffered shipping damage as later complaint
cannot be accepted. Pay close attention to motor installation and rotor shaft.
Move the fan with care as plastics are sensitive to shocks and impacts at low temperatures.
If transported on a lorry fans must be secured against tipping, falling over, moving etc.
Check lifting equipment beforehand.
Adhere to the weights in 7.5.
