vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00
Date: 2010/06/14 Rev. 0
PAGE 49 OF 62
[40] PROGRAMMING THE CALLING SCHEDULE
(MDB)
This address will appear if the machine has been connected to a modem interface card.
There are 3 options:
•
Calling time:
The time when the machine should call the management centre each
day. There is a two hour margin to make the call at 1-minute intervals between tries.
•
Begin standby time:
Time from which the machine will be waiting for a call from the
management centre.
•
End standby time
:
Time at which the machine will cease to wait for a call from the
management centre.
The setting that you can change will blink on the display.
To toggle between settings, that is, from hours to minutes and vice versa
To increase it or decrease it.
The value of the hours and the minutes will be
set at 99, equivalent to a null value that will
disable this option.
[41] PROGRAMMING THE TELEPHONE NUMBER
(MDB)
This address will appear if the machine has been connected to a modem interface card.
When you access this address you will see the number currently programmed. The
cursor will blink to show its position.
To move the cursor toward the right or toward the left.
When you reach the last character (
#
)will be displayed to indicate that you cannot
continue. If an arrow (
)is visible you can continue advancing. The telephone
number can have a maximum of 20 characters. Once the cursor is in place, you can
PHONE NUMBER
PROGRAMMING
PHONE TIMES
PROGRAMMING
1
2
3+ 4- c-del
#
1
2
3+ 4- c-del
#
1
2
3+ 4- c-del
#
1
2
3+ 4- c-del
99:99
1
2
3+ 4- c-del
99:01
1
2
3+ 4- c-del
01:99
1
2
3+ 4- c-del
99:99
1
2
3+ 4- c-del
99:99
1
2
3+ 4- c-del
99:99
