vision
Snack Plus/Easy Combo
//
Vending
MNP86V03GBV00
Date: 2010/06/14 Rev. 0
PAGE 36 OF 62
[09] CHANNEL CONFIGURATION
At this address you can program, consult and erase channel configurations.
Access the configuration programming option.
First enter the selection number. You can program the following numbers: 11-19, 21-
29, 31-39, 41-49, 51-59, 61-69 and 71-79. Then enter the channel numbers to be
associated to the selection number chosen (110-116, 120-126, 130-139, 140-149, 150-
159, 160-169, 170-179 and 180-189). You can only enter the numbers of the channels
that the machine has detected as connected.
Validates the selection.
Returns to the previous menu.
You can choose the channel by entering the 3 digits using the keys
to
or by
moving from one channel to the next using key
to move forward or using key
to move backward.
Access programmed data consultation.
Enter the selection number you wish to consult. The display will show the numbers of
the channels associated to this selection number.
Access the menu to enter the key.
If you enter the key “
”,all detected and not connected channels will be
left without an association to any selection number (i.e., they will all be associated to
selection number 0) and the display will blink.
If you enter the key “
”you will access a channel selection menu that
allows you use the keypad to enter detected and connected channels which you do not
wish to be associated to any selection number.
Finally, if you enter the key “
”all channel configurations are erased and
you need to reconfigure them.
[10] COIN INHIBITION
(MDB)
When you access this address it shows the value of the coin and its status (inhibited or
enabled).
COIN
INHIBITION
PASSWORD:
---
CHANNEL NUMBER:
XXX
ASSOCIATED
CHANNELS:
SELECTION NUMBER
_
SELECTION NUMBER
_
*-
#-
A-CHOOSE
SAVED
*-
#-
A-CHOOSE
XXX
SELECTION NUMBER
_
1-PROG. 2-CHECK
CONFIG. C-DEL
MACHINE
COMPOSITION