Joerns Oxford Mermaid Скачать руководство пользователя страница 23

Страница: 23 / 32

English

Oxford

Mermaid & Ranger

16. Maintenance Schedule

Joerns Healthcare Ltd

recommend the following tasks are carried out by authorised service dealers

only.

FLOOR FIXING:

Check the base plate fixing is sound and secure. Follow the test routine as

detailed in the installation instructions. Wooden floors require inspection at more frequent intervals.

MAST TO BASE:

Check the four Nyloc nuts securing the mast to the base plate are fully tightened.

Check also for signs of grease leakage between the mast and the base plate.

CHAIR SUPPORT CLAMP:

Check the chair support clamp is correctly orientated as per the

Setting Up instructions. Make sure the seat does not touch the side or bottom of the bath. Check

the seat locks in the correct positions. CHECK the operation of the seat lock.

SUPPORT ARM:

Check the support arm has the safety screw in position and tightened. Check the

seat is securely attached to the support arm and the fixing nuts and bolts are fully tightened.

SEAT:

Check the seat for splits or damage. Check the Mermaid seat for presence of nine safety

plugs fitted to the seat moulding (Lifts before December 1998). Check that the seat is securely

fitted to the frame.

RANGER BASE CASTORS:

Check all castors are free running. Check for secure fixing to the

base legs. Check brakes for correct operation.

SAFETY LATCHES:

Check the correct function of the safety latches on the Ranger Chair and the

Ranger support arm.

LAP STRAP FITTING:

Check that the lap strap is fitted securely to the seat frame and is not

frayed, worn or damaged.

SEAT FIXING:

Check that the seat is securely fitted to the frame.

HOIST CLEANING:

Refer to section 13.

LAP STRAP CLEANING:

Refer to section 13.

LOAD TEST:

The load test should be carried out in accordance with the manufacturer’s test

procedures and the directive detailed in EN ISO 10535:2006 - Annex B - Periodic Inspection B1 -

see excerpt below. It is strongly recommended that an authorised service dealer carry out the test.

EN ISO 10535:2006

Annex B

(Informative)

Periodic Inspection

B. 1

Periodic inspection of the hoist should be undertaken at the time intervals stated by the

manufacturer, but at least once a year. By periodic inspection is meant a visual examination

(particularly of the hoist’s load bearing structure and lifting mechanism with attachments, brakes,

controls, safety devices and person-support devices) and whatever function tests and maintenance

measures may be required, e.g. adjustment of brakes, tightening of fasteners.
Every inspection should include a working load test of one (1) lifting cycle with the maximum load.

CERTIFICATION:

An authorised service dealer will issue a test certificate after satisfactory

completion of the load test. This certificate will be valid for the period stated on the certificate.

Содержание Oxford Mermaid

































Результаты поиска

Содержание Oxford Mermaid

Отзывы:

Бренды по названию

Популярные бренды

Joerns Oxford Mermaid, Руководство пользователя

Результаты поиска

Содержание Oxford Mermaid

Отзывы:

Бренды по названию

Популярные бренды