12
English
Oxford
®
Mermaid & Ranger
9. Wooden Floor Installation Kit
Two steel bars are provided for the safe installation of the bath lift to wooden floors. The bars
should be used as follows:
All three holes in the base plate should be used, with one bar spanning either ‘A’ or ‘B’ and the
other bar bolted through the third hole. Three countersunk steel screws are supplied for this
purpose. Ideally each bar should span as many floorboards as possible (usually three). Whether
a bar will span either ‘A’ or ‘B’ will be decided according to the direction and position of the joists
in the area chosen for sitting the Bath Lift.
Access is normally achieved by removing a section of floorboard adjacent to the fixing area
large enough to allow the insertion and positioning of the bars. All floorboards taking any
part of the load should be securely fastened down to the joists with 4” (100mm) countersunk
wood screws. The final installation should be tested according to the manufacturers
recommendations.
MERMAID BASE PLATE
STEEL BAR
A
B
Содержание Oxford Mermaid
Страница 8: ...8 English Oxford Mermaid Ranger 5 Oxford Mermaid Electric Illustration ...
Страница 29: ...29 English Oxford Mermaid Ranger ...
Страница 30: ......
Страница 31: ......