62
Unusual noises
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or the
wall.
If necessary, carefully bend the
component out of the way.
Water on the floor
Water drain hole is blocked.
See the Cleaning and Care section.
Side panels are hot
It’s normal. Heat exchange parts are in
the sides.
Take gloves to touch sides.
If the malfunction shows again, contact the Service Center.
This list provides all Eco-design requirements (following the (EU)2019/2019 Eco-design
and (EU)2019/2016 Energy labelling) , if the requirement is applicable to your product. The
refrigerating appliance is not intended to be used as a built-in appliance, unless specifically
shown as such into its instruction manual. The drawers, baskets and shelves should be
kept in their current position unless otherwise specified in this document. Doors and lids of
the refrigeration appliance should be removed before disposal in the landfill, to avoid
children or animals getting trapped inside.
Recommended setting:
Refrigerator compartment: +4ºC
Freezer compartment: -18ºC
FAST FREEZE
The use of this function is recommended when placing a very high quantity of food to be
frozen in the freezer compartment. 24 hours before freezing fresh food, press the Fast
Freeze button to activate the Fast Freeze function. When activated, the Fast Freeze
indicator turns on. After 24 hours place the food to be frozen in the freezing zone of freezer
compartment. The function is automatically disabled after 72 hours, or can be manually
disabled by pressing Fast Freeze button.
FAST COOL
Using Fast Cool function it is possible to increase the cooling capacity in the refrigerator
compartment. The use of this function is recommended when placing a very high quantity
of food in the refrigerator compartment. Press the Fast Cool button to activate Fast Cool
function. When activated, the Fast Cool indicator turns on. The function is automatically
disabled after 6 hours, or can be manually disabled by pressing Fast Cool button again.
