Jobsite CT4284, Оригинальная инструкция

Страница: 11 / 16

• Place the machine on the workpiece with the saw marking above the start
of the cutting line.
• Check that the laser line aligns with the cutting line as marked on the
workpiece.
• Switch on the machine.
• Follow the “Instruction for use” to perform a cut.
• After use, switch off the laser
PENDULUM ADJUSTMET
This jigsaw has pendulum action whereby the blade roller guide moves back
and forth to make the blade swing slightly as it cuts.
Pendulum action increases the speed of cut but may result in a rougher finish
to the cut in some materials.
Set the pendulum adjuster (6) to one of the three settings according to degree
of pendulum action required.
Experiment on a piece of scrap material to determine the optimum pendulum
action setting.
DUST EXTRACTION
To improve dust extraction from the working area, connect dust extraction
equipment to the dust extraction outlet at the rear of the tool.
The dust extraction adaptor supplied can be use to connect an ordinary
household vacuum cleaner to the tool.
ADJUSTING THE CUTTING SPEED
The variable speed feature of this jigsaw enhances the cutting performance
and saves the blade from undue wear.
The variable speed dial (2) is used to program the speed of the blade.
The speed should be adapted to the material being cut.
Use your thumb to turn the dial forward to increase the speed and backward
to decrease it.