Jobsite CT4284, Оригинальная инструкция

Страница: 7 / 16

c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired before
use.
Many accidents
are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
5)
ADDITIONAL SAFETY RULES FOR JIG SAW
WARNINGS. Before connecting a tool to a power source (mains switch power
point receptacle, outlet, etc.) be sure that the voltage supply is the same as
that specified on the nameplate of the tool.
A power source with a voltage greater than that specified for the tool can
result in serious injury to the user, as well as damaged to the tool. If in doubt,
do not plug in the tool. Using a power source with a voltage less than the
nameplate rating is harmful to the motor.
Your tool is double insulated for additional protection against a possible
electrical insulation failure within the tool.
Always remove the plug from the mains socket before making any
adjustments or maintenance, including changing the blade.
•
Ensure that lighting is adequate.
• Do not use the saw unless the guards are in place.