Jobsite CT1900, Оригинальное руководство пользователя

Страница: 9 / 31

9
1. Starting the engine
Open the petrol cock by turning it down
Move the ON/OFF switch to position "ON” with the key.
Move the choke lever to position IØI.
Start the engine with the reversing starter by pulling the handle forcefully. If the engine does not
start, pull the handle again.
Push the choke lever back again after the engine has started.
Important!
When starting with the reserve starter, the motor may recoil suddenly as it starts up, resulting in
hand injuries. Wear protective gloves when starting the equipment.
2. Connecting consumers to the generator
Connect the equipment you want to use to the 230 V and 115V~sockets (3)
Important: These sockets may be loaded continuously (S1) with 2600W and temporarily (S2)
for a maximum of 2 minutes with 2800W.
The generator is suitable for 230 V and 115V~ AC appliances.
Do not connect the generator to the domestic power network as this may result in damage to
the generator itself or to other electrical appliances in your home.
Note: Some electrical appliances (power jigsaws, drills, etc.) may have a higher level of power
consumption when used in difficult conditions.
3. Switching off the engine
Before you switch off the generator, allow it to run briefly with no consumers so that it can "cool
down”
Move the ON/OFF switch
to position "OFF” with the key.
Close the petrol cock