Jobsite CT1900, Оригинальное руководство пользователя

Страница: 4 / 31

4
Do not allow the generator to run out of fuel when a load is connected.
During operation voltage fluctuations may occur. Sensitive electronic devices like television
sets or computers may only be operated in conjunction with a surge protector.
Do not interfere with the internal wiring.
Never climb or stand on the generator.
To prevent the risk of burns do not touch the engine, alternator or exhaust.
These parts become extremely hot during operation.
Operational safety warnings
To prevent overheating of the engine keep a distance of at least 1M from buildings or other
objects when operating the generator.
Ensure that the generator is standing level on a flat, solid surface.
Ensure that the surrounding area is free from flammable materials or objects that can be
damaged by heat.
Never move or tilt the generator during operation.
HANDLING & STORAGE
CAUTION: Always use and store this generator correctly, never use or store this generator on
it
’s side as oil or fuel may leak and damage the generator or your property.
If the generator has been used always allow it to cool for at least 30 minutes before
transporting the generator and ensure that the generator has fully cooled before returning it to
storage as a hot engine and exhaust system could cause personal injury or ignite some
materials.
To prevent fuel/oil spillage when transporting, the generator should be secured upright in it
’s
normal operating position with the engine switch in the off position.
Take care not to drop or strike the generator when transporting. Never cover the generator
when in use.
Before starting the generator for a long period:
Be sure that the storage area is free of excessive humidity and dust.
Drain the fuel, storage procedure below.
Unscrew the fuel tank cap, remove the filter screen and empty the fuel tank into an approved
petrol container using a commercially available hand siphon, re-install the filter screen and fuel
tank cap.
Loosen the carburetor drain screw and drain the carburetor into a suitable container.
Remove the spark plug maintenance cover and remove the spark plug cap.