Jobsite CT0964, Инструкция по эксплуатации

Страница: 9 / 16

4. UNPACKING AND CHECKING
Carefully remove the product from the packaging and examine it for any sign of
damage that may have happened during shipping. Lay the contents out and
check them against the parts shown below. If any part is damaged or missing;
please contact the CANNONTOOLS and do not attempt to use the product.
Includes:
1pc wall chaser , 2pcs diamond cutting blades, 1pc spanner
1pc auxiliary handle, 1pc break-out tool
WARNING!
Only use tools that are in perfect condition.Wear hearing
protection, protective goggles,dust mask and gloves as required.
Provide for good ventilation.
WARNING!
Switch off the tool and disconnect it from the power outlet.
Always ensure the chaser is switched off and the plug is disconnected
from the mains supply before any adjustments are made.
WARNING!
When mounting and replacing diamond cutting discs,it’s
recommended to wear protective gloves.
WARNING! Diamond cutting discs become very hot during operation,
do not touch them until they cooled down.