Jobsite CT0964, Инструкция по эксплуатации

Страница: 5 / 16

breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed. Use of
the power tool for operations different from intended could result in a hazardous
situation.
2.5 Service
Have your power tool serviced by a qualified repair person using only. Identical
replacement parts.
Have your power tool serviced by a qualified repair person using only identically
replacement parts. This will ensure that the safety of the power tool is
maintained.
2.6 Tool-specific Safety Warnings
- Always use guard provided with the tool. The guard must be securely attached
to the power tool and positioned for maximum safety, so the least amount of
wheel is exposed towards the operator. Position yourself and bystanders away
from the plane of the rotating wheel. The guard helps to protect operator from
broken wheel fragments and accidental contact with wheel.
- Use only diamond cut-off wheels for your power tool. Just because an
accessory can be attached to your power tool, it does not assure safe operation.
- The rated speed of the accessory must be at least equal to the maximum speed
marked on the power tool. Accessories running faster than their rated speed can
break and fly apart.
- Wheels must be used only for recommended applications. For example: do not
grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to these wheels may cause them to
shatter.
- Always use undamaged wheel flanges that are of correct diameter for your
selected wheel. Proper wheel flanges support the wheel thus reducing the
possibility of wheel breakage.
- The outside diameter and the thickness of your accessory must be within the
capacity rating of your power tool. Incorrectly sized accessories cannot be
adequately guarded or controlled.