jobmate 54-2877-4, Руководство пользователя

Страница: 12 / 18

SCREWDRIVER BIT STORAGE
Convenient screwdriver bit storage (1) is
provided at the rear of the drill housing (see
Fig. 3).
TORQUE ADJUSTMENT
Your drill is equipped with an adjustable
torque clutch for driving different types of
screws into different types of materials. The
proper setting depends upon the type of
material and size of screw being used.
Adjust the torque setting as follows:
1.
Identify the torque settings located on
the torque adjustment ring (1) (see Fig.
4).
2.
Rotate adjustment ring to align the
correct torque setting number with the
torque indicator arrow (2). See chart
below for correct torque settings.

1
– 2 For driving small screws

3
– 4 For driving medium screws
into soft materials

5
– 6 For driving screws into soft &
medium hard materials

7 - For driving screws into
hardwood

8 - For driving large screws

Use highest setting for drilling. This
position is marked with a picture of
a drill bit on the torque adjustment
ring.
FORWARD/REVERSE SWITCH
The forward/reverse switch (1) is
conveniently mounted above the trigger
switch (2) (see Fig.5). To make the drill
rotate clockwise (for drilling) push the
forward / reverse switch to the left. To make
the drill rotate counter clockwise for
removing screws, push the forward / reverse
switch to the right.
NOTES:
a) Never change position of the
forward/reverse switch while chuck is
turning.
b) The trigger switch will NOT function with
the forward/reverse switch in the middle
position.
VARIABLE SPEED TRIGGER SWITCH
This drill is equipped with a variable speed
ON/OFF trigger switch.
1. To start drill, gently squeeze the trigger
switch (1) (see Fig. 6).
NOTE: Drill will turn at its slowest speed
when the trigger switch is moved only a
small amount. The drill will turn at its
fastest speed when the trigger switch is
fully depressed.
2. To stop the drill, release the trigger
switch.
12
ASSEMBLY & OPERATION
Fig. 3
Fig. 4
Fig. 5