jobmate 54-2877-4, Руководство пользователя

Страница: 4 / 18

GENERAL SAFETY RULES
WARNING: Read and understand
all instructions. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious
personal injury.
WORK AREA
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust.
Power
tools create sparks which may ignite the
dust or fumes.
Keep bystanders, children and visitors
away while operating the tool.
Distractions
can cause you to lose control.
ELECTRICAL SAFETY
Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other). This plug will fit in a polarized
plug only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician to install a polarized outlet. Do
not change the plug in any way.
Double
insulation eliminates the need for the three
wire grounded power cord and grounded
power supply system.
Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators.
There is increased risk of
electric shock if your body is grounded.
Don’t expose power tools to rain or wet
conditions.
Water entering the power tool
will increase the risk of electric shock.
Do not abuse the cord. Never use the cord
to carry the tools or pull the plug from an
outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged
cords immediately. Damaged cords increase
the risk of electric shock.
When operating a power tool outside,
use outdoor extensions cord
marked “W-
A” or “W”.
These cords are rated for
outdoor use and reduce the risk of electric
shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use the tool while
tired or under the influence of drugs,
alcohol or medication.
A moment of
inattention while operating power tools may
result in serious personal injury.
Dress properly. Do not wear loose
clothing or jewellery.
Contain long hair. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothing, jewellery or long hair
can be caught in moving parts.
Avoid accidental starting. Be sure switch
is OFF before plugging in.
Carrying tools
with your finger on the switch or plugging in
tools that have the switch ON invites
accidents.
Remove adjusting keys or wrenches
before turning the tool ON.
A wrench or
key that is left attached to a rotating part of
the tool may result in personal injury.
Do not overreach. Keep proper footing
and balance at all times.
Proper footing
and balance enables better control of the
tool in unexpected situations.
Use safety equipment. Always wear eye
protection.
Dust mask, non-skid safety
shoes, hard hat or hearing protection must
be used for appropriate conditions.
POWER TOOL SAFETY
4
SAVE THESE INSTRUCTIONS FOR REFERENCE
!