JML Go Chef Stand Mixer, Руководство пользователя

Страница: 7 / 12

5 6
Using
GoChef
™
Stand Mixer
Fitting the Splash Guard
The Splash Guard ensures that liquid or powder
ingredients don’t spit and spill out of the bowl during
mixing. It also helps you to add further ingredients to the
bowl during mixing.
If you wish to use the Splash Guard, remove the Pouring
Funnel (if necessary) from the Splash Guard. With the
Main Shaft lowered and with a mixer head already in
place, slide the Splash Guard around the Main Shaft.
Rotate the opening in the Shield so it is positioned
roughly at the front of the bowl.
Re-insert the Pouring Funnel by locating the raised bar on each side and sliding them into the two
slots on each side of the Splash Guard opening.
Switching on
To turn the Stand Mixer on, simply twist the Speed Dial clockwise to ON.
Regardless of your ingredients or recipe, it is best to stay on the ON setting for a few rotations
just to blend your ingredients a little without any risk of significant spitting or spilling.
Once your ingredients have started to blend, you can raise the speed to the level you require.
Please Note: Do not operate the appliance for more than 10 minutes at one time. Allow 30
minutes between heavy loads and extended periods of operation. As a safety feature the
Stand Mixer will turn off if there is a risk of overheating. Unplug and allow to cool before
using again.
When you have finished
Return the Speed Dial to OFF. Remove the Splash Guard, if used, by lifting out the Pouring Funnel
and sliding the Guard out.
Use the Lift Switch to raise the top of the Stand Mixer and the Main Shaft.
To remove the Bowl, twist anti-clockwise and lift. To remove the mixer head, simply twist anti-
clockwise and slide off.
Please Note: The Bowl and the mixer head may become hot during mixing. Use oven gloves to
remove if using a high speed setting over a long period.
GCSM_IM_B.indd 7 09/05/2014 12:49