16175-01 rev. A
Page 2
©2019 JMA Wireless. All rights reserved. This document contains proprietary and confidential information. All products, company names,
brands, and logos are trademarks™ or registered® trademarks of their respective holders. All specifications are subject to change without
notice. Revised: January 29, 2020
+1 315.431.7100 [email protected]
Installation Instructions
JMA Weather Protection System™
WPS-DM-14S, DM Connector to Port
Properly mated connector.
Step 5: Install WPS-DM-14S
Slide the WPS-DM-
14S over the 1/4”
connector, making sure to overlap
the port seal.
Completed installation of the JMA
Weather Protection System.
Step 4: Connect and torque interface
Connect the 1/4” connector to the
antenna port or device, and hand
tighten
Torque the connection to 18
lbf∙ft
using TQ-114-F8 torque wrench.
Proper port seal alignment
