JLG X20JPLUS, Инструкция оператора по безопасности, техническому обслуживанию и ремонту

Страница: 134 / 206

132 Boom Lift Models X20JPLUS
USING THE MACHINE MUX20JP021602
11.7.RECHARGING THE BATTERY
11.7.1.Battery charging Petrol/Diesel engine
The machine is equipped with a charging system of the battery. Using the Petrol/
Diesel engine to a regime of revolutions exceeding 2200rpm the battery is rechar ‐
ged by the current generator. There is also the possibility of recharging the bat ‐
tery by the power supply.
To do this, proceed as follows:
• Check that the battery cut ‐ out is connected.
• Power the machine by an electric cable connecting it to the socket on the chas ‐
sis near the electric motor and activate the main supply switch in the control ca ‐
binet of the motor.
• In this condition the battery charger mounted on the machine recharges the
battery.
both connectors must be closed with the respective sealing plugs to prevent
moisture from entering.
Fig. 144 Main supply socket Fig. 145 Main supply switch
Recharging battery must be carried out in an ventilated area away
from open flames or sources of ignition. In order not to cause damage
to the battery is appropriate to recharge the same only when the am ‐
bient temperature is between 0 and 40 ° C