JLG TOUCAN 10E, Руководство по эксплуатации и безопасности

Страница: 84 / 130

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-14 – JLG Lift – 31210088
Battery Voltage and Electrolyte Specific Gravity
NOTE: Voltage and specific gravity measures should not be per-
formed after battery cells have been filled. These mea-
sures must be done after a complete charge, once the
charger has been unplugged and after the battery has
been standing for at least 15 minutes.
- Open the filling cap of the cell on which the red cable is
connected (B+).
- Using the hydrometer (supplied with the machine), take a
quantity of electrolyte sufficient so that the float emerges.
Ensure that the float top does not touch the rubber bulb
or that the float does not stick by capillarity to the glass
wall.
- Read the value as indicated in Figure 6-8.
- Return electrolyte in the cell and record the value in the
battery service log.
- Measure the cell voltage and record the value in the bat-
tery service log.
- Repeat operation for each cell in sequence from B+ (Red
Cable) to B- (Black cable).
NOTE: If important disparities are noticed between gravity/volt-
age of different cells or if the gravity values are lower than
1.240kg/l (after a complete charge) contact JLG Product
Support.
Figure 6-8. Measuring Electrolyte Specific Gravity