JLG TOUCAN 10E, Руководство по эксплуатации и безопасности

Страница: 100 / 130

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-30 – JLG Lift – 31210088
2-1 Power-Up
0027
FUNCTION SELECTED BUT LIFT
ENABLE SWITCH OPEN The Mast or the Jib joystick was activated, but the
enable switch was not. • Release joystick and allow to center.
• Check if the joystick is obstructed or jammed.
• Check if the enable switch is damaged.
Refer problem to a qualified JLG mechanic.
0028
DRIVE PREVENTED - TILTED &
ELEVATED Drive is prevented while the platform is not in
transport position and the chassis is not level. • Check that the machine is tilted. If so, lower the plat-
form and reposition the machine to a level surface.
• Fully stow the platform.
• Check that the tilt sensor is securely mounted and its
wire connected.
Refer problem to a qualified JLG mechanic.
0029
RUNNING AT CREEP - MAX
ELEVATION Drive speed is limited while the mast if fully
extended.
Displays on the analyzer only. • Fully stow the platform.
• Check that the mast switches are securely mounted.
Refer problem to a qualified JLG mechanic.
DTC FAULT MESSAGE DESCRIPTION CHECK
DTC FAULT MESSAGE DESCRIPTION CHECK
211
POWER CYCLE The normal help message is issued at each power
cycle. Displays on the analyzer only. Normal operation. No check necessary.
212
KEYSWITCH FAULTY Both Platform and Ground Modes are selected
simultaneously. Defaults to Ground Mode. Refer problem to a qualified JLG mechanic.