JLG TOUCAN 10E, Руководство по эксплуатации и безопасности

Страница: 60 / 130

SECTION 4 – MACHINE OPERATION
4-10 – JLG Lift – 31210088
Figure 4-8. Emergency Controls
1. Position the key-select switch (1) to GROUND.
2. Push and hold the enable button (2) .
3. Actuate the appropriate function button (3) until the
desired elevation or position of the platform is achieved.
4.8 ALARMS
Overload Warning Light/Alarm (If equipped)
When the maximum rated load in the platform is exceeded, RED
light indicators at both the ground and the platform control sta-
tions will blink and an audible alarm will sound. When the over-
load indicator warning is activated, all machine functions are
disabled. The platform must be safely unloaded until the alarm stops.
Tilt Warning Light/Alarm
When the chassis is out of level (Refer to Table 6-1), the RED
light indicator at platform control station will illuminate. If the
mast is out of transport (stowed) position, and the chassis is out
of level an audible alarm will sound.
IF THE WARNING LIGHT IS ILLUMINATED WHEN THE MAST IS RAISED,
LOWER THE MAST AND REPOSITION MACHINE SO THAT IT IS LEVEL
BEFORE ELEVATING THE MAST.