JLG TOUCAN 10E, Руководство по эксплуатации и безопасности, Страница: 101 / 130

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
31210088 – JLG Lift – 6-31
2-2 Platform Controls
DTC FAULT MESSAGE DESCRIPTION CHECK
221
FUNCTION PROBLEM - HORN
PERMANENTLY SELECTED The horn switch was closed during power-up in
platform mode. • Check if the horn switch is damaged, obstructed or
jammed.
Refer problem to a qualified JLG mechanic.
224
FUNCTION PROBLEM - STEER
LEFT PERMANENTLY
SELECTED The Steer Left Switch was closed during power-
up in platform mode. • Check if the steer left switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
225
FUNCTION PROBLEM - STEER
RIGHT PERMANENTLY
SELECTED The Steer Right Switch was closed during power-
up in platform mode. • Check if the steer right switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
226
ACCELERATOR FAULTY -
WIPER OUT OF RANGE The joystick wiper signal input is outside the
acceptable voltage range. • Center joystick and check to see if a power cycle will
clear DTC.
Refer problem to a qualified JLG mechanic.
227
STEER SWITCHES FAULTY The steer left and steer right inputs were closed
simultaneously. • Check if the steer switches are damaged, obstructed or
jammed.
Refer problem to a qualified JLG mechanic.
228
FUNCTION LOCKED OUT -
ACCELERATOR NOT
CENTERED The joystick was not centered at power-up in plat-
form mode. • Release joystick and allow to center.
• Check if the joystick is obstructed or jammed.
Refer problem to a qualified JLG mechanic.