SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-16
31215015
Platform Console
(See Figure 3-10., Platform Control Console)
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
1.
Drive Speed Switch
The forward position gives maxi
-
mum drive speed. The back posi
-
tion gives maximum torque for
rough terrain and climbing
grades. The center position
allows the machine to be driven
as quietly as possible.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
2.
Platform Leveling Override
A three position switch allows the operator to
adjust the automatic self leveling system. This
switch is used to adjust platform level in situa
-
tions such as ascending/descending a grade.
3.
Fuel Select (Dual Fuel Engine Only)
(If Equipped)
Moving the switch to the appropriate position
selects gasoline or liquid propane fuel.
4.
Horn
A push-type Horn switch supplies electrical
power to an audible warning device when pressed.
5.
Power/Emergency Stop Switch
A two-position red mushroom shaped switch
furnishes power to Platform Controls when
pulled out (on). When pushed in (off), power is
shut off to the platform functions.
To
order
go
to
Discount-Equipment.com