SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
31215015
7-33
Installation
1.
If equipped, install the filter bowl gasket.
2.
Install the filter into the housing.
3.
Install the filter bowl up to the bottom of the electric lock off.
4.
Tighten the filter bowl retainer nut.
5.
Open manual shut-off valve. Start the vehicle and leak check
the propane fuel system at each serviced fitting.
7.6
PROPANE FUEL SYSTEM PRESSURE RELIEF
THE PROPANE FUEL SYSTEM OPERATES AT PRESSURES UP TO 312 PSI (21.5 BAR). TO MIN
-
IMIZE THE RISK OF FIRE AND PERSONAL INJURY, RELIEVE THE PROPANE FUEL SYSTEM
PRESSURE (WHERE APPLICABLE) BEFORE SERVICING THE PROPANE FUEL SYSTEM COM
-
PONENTS.
To relieve propane fuel system pressure:
1.
Close the manual shut-off valve on the propane fuel tank.
2.
Start and run the vehicle until the engine stalls.
3.
Turn the ignition switch OFF.
RESIDUAL VAPOR PRESSURE WILL BE PRESENT IN THE FUEL SYSTEM. ENSURE THE WORK
AREA IS WELL VENTILATED BEFORE DISCONNECTING ANY FUEL LINE.
7.7
SUPPLEMENTAL INFORMATION
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC
and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less than
70dB(A)
For combustion engine powered machines, guaranteed Sound
Power Level (LWA) per European Directive 2000/14/EC (Noise
Emission in the Environment by Equipment for Use Outdoors)
based on test methods in accordance with Annex III, Part B,
Method 1 and 0 of the directive, is 104 dB.
The vibration total value to which the hand-arm system is sub
-
jected does not exceed 2,5 m/s
2
. The highest root mean square
value of weighted acceleration to which the whole body is sub
-
jected does not exceed 0,5 m/s
2
.
To
order
go
to
Discount-Equipment.com
