JLG 1850SJ, Руководство по обслуживанию и ремонту, Страница: 124 / 712

SECTION 3 - CHASSIS & TURNTABLE
3-74 3121619
616 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Error report due to an interrupted SPI communi-
cation (ECU internal error) Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
617 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory multiple error in complete ROM-test during
postdrive detected (ECU internal error) Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
618 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Too less bytes received by monitoring memory
from CPU as response (ECU internal
error). Loss of synchronization sending bytes to
the monitoring memory from CPU Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
619 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Suspected components:
Injector
ECU
wiring harness/connector Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
620 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Error trying to set MM Response time (ECU
internal error) Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
621 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Error detected in the internal ECU communica-
tion, Too many SPI errors during
MoCSOP execution Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
623 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Error in the check of the shut-off path test of the
under voltage detection (ECU internal
error). Diagnostic fault check to report the error
in undervoltage monitoring Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
624 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Error in the check of the shut-off path of the
monitoring module (ECU internal error). Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
625 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Time out error trying to set or cancelling the
alarm task (ECU internal error). Failure
setting the alarm task period Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
627 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Error in time monitoring of the shut-off path
test (ECU internal error). Diagnostic fault
check to report the timeout in the shut
off path test Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
628 555 523612 12 Internal hardware monitoring: the CPU of
the ECU is reset and the cause is logged inter-
nally; no item will be created in error mem-
ory Error in the check of the shut-off path test of the
over voltage detection (ECU internal
error). Diagnostic fault check to report the error
in overvoltage monitoring Threshold for error detection is an internal ECU
threshold.
If error is still present, exchange ECU.
629 555 523612 12 The two voltage values (ADC_VAL1,
ADC_VAL2), detected by
the accelerator pedal, are not plausible to
each other. Defect pedal or wiring Threshold for error detection is an internal ECU
threshold.
Check Pedal, repair or exchange the Pedal.
Check wiring.
If error is still present, exchange ECU.
Table 3-10. Engine Fault Codes
Deutz
Code
Blink
Code
SPN FMI Description Possible Cause Action