JLG 1532R, Руководство по эксплуатации и безопасности

Страница: 39 / 98

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121744 JLG Lift – 3-7
key switch. In addition, the switch can be used to turn off power
to the function controls in the event of an emergency.
Hourmeter
(Item 5 - Figure 3-2.)
The machine is equipped with an hour meter to
indicate the number of hours the machine has
been operated.
Overload Indicator (If LSS Equipped)
(Item 6 - Figure 3-2.)
Overload Indicator - Indicates the platform has
been overloaded. An audible alarm will also sig-
nal when the platform is overloaded.
NOTE: If the Overload Indicator is illuminated;
CE: All functions will be prevented from the platform and
ground controls. Lower platform using the machine man-
ual descent control.
ANSI Export/Australia/Japan: All platform functions
will be prevented. Fully lower the platform from the
ground controls or using the machine manual descent
control. Reduce the weight in the platform to not exceed
the rated workload indicated on the capacity decal.
MDI-Indicator - (If Equipped)
(Item 7 - Figure 3-2.)
The MDI indicator or Multifunction Digital Indicator displays a
Battery Discharge Indicator (BDI), an LCD display which shows
the current hour-meter reading or Diagnostic Trouble Code(s)
(DTC) when a functional problem occurs with the machine, and
a system distress LED.
When a problem occurs (DTC Code displayed):
• A wrench Icon (item 1) LED will illuminate. (See Figure 3-3.)
• A three to five digit DTC code will display on the Diagnostic
Trouble Code LCD display (item 2) , below the wrench
icon.