18
Command Reference
When the ES-450SP4 is powered up, the unit constantly queries
the deck for timecode and status.
Troubleshooting
If for some reason the ES-450SP4 does not give you the expected
results, take a moment to do some investigating. The most
important concept is that you have your ES-450SP4 connected
properly as outlined in
Setting up the ES-450SP4
. Take a minute to
double check this setup.
Double check with the manufacturer of the deck you are
controlling to see if an external controller is supported. As long as
your cable connections are setup properly, everything should be
working.
Make sure your device is set to "Remote" and not "Local" control.
This will insure that your ES-450SP4 is communicating with your
device.
Care and Service
If properly cared for, your ES-450SP4 should provide years of
troublefree performance. Avoid dropping the ES-450SP4 or
banging hard on the controls.
Clean with a soft, damp cloth. Do not allow liquids to get inside
the unit.
There are no user-serviceable parts in the ES-450SP4. Please refer
to the JLCooper Electronics Limited Factory Warranty for detailed
warranty and service information.
