JLCooper Electronics ES-450SP4, Руководство пользователя

Страница: 12 / 19

12
Track Arming
Above the Transport Controls are the Track Arming buttons, which
select tracks to be overwritten when the device is placed in
Record .
Pressing the ASM button will place the device in to Assemble
mode where the video and audio tracks are written. To insert new
material over existing material, the
Insert mode is used. To initiate
Insert mode, press the INS button and any tracks you wish to
record.
LEDs above the Track Arming buttons indicate the tracks that are
armed or being recorded on.
Record is initiated by pressing REC/SHIFT and F-PLAY.
Editing Controls
Located around the Jog/Shuttle mechanism are the Editing
Controls. At the top center just above the Jog/Shuttle mechanism
the SHUTTLE SELECT button. The SHUTTLE SELECT button
allows the device to return to a shuttle operation after it has been
interrupted by a
Stop, Frame+1, Frame-1 or Goto command. The
direction arrows indicate the direction of the pending shuttle. In
Jog mode, this button has no effect.
On either side of the SHUTTLE SELECT button are the
FRAME+1 and FRAME-1 buttons. Pressing either of these
buttons will move or
bump the tape forward or backwards one
frame. This is performed by using the timecode returned to the
ES-450SP4 by the device. The frame rate must be set for this
function to operate properly. To set the frame rate, press SHIFT +
EJECT. This setting is stored in nonvolatile memory.
There are two ways to perform this based on the ballistics of the
controlled deck: “CueUp” mode and “SloMo” mode. These can be
selected by pressing SHIFT + STOP. This setting is also stored in
nonvolatile memory.