14
2.
Enter
Record Ready
mode
3.
Switch to
Record
mode at the
Mark In
point
4.
Revert to
Record Ready
mode at the
Mark Out
point
5.
Stop the tape at the
Mark Out
point plus the postroll
Timecode Window
The Timecode Window displays the timecode that the device sends
via the 9-pin interface. This is usually the longitudinal timecode of
the media. Some devices will send timecode derived from VITC, a
dedicated timecode track or the control track. The timecode is
displayed in hours:minutes:seconds:frames format. Drop frame
timecode is indicated by a small dot or period between “LTC” and
the hours field.
TC= 01:25:36:12
Non-Drop frame timecode
TC=
.
01:25:36:12
Drop frame timecode
