JKEXER EPIC 823, Руководство пользователя

Страница: 15 / 24

FAT %
10~20%
Male
Female
20~25%
Over25%
15~25%
25~35%
Over35%
Normal
Overweight
Extremely Overweight
Normal
Overweight
Extremely Overweight
BODY TYPE: 1~5
1
2
3
4
5
Skinny
Underweight
Normal
Overweight
Extremely Overweight
ERROR MESSAGE & TROUBLE SHOOTING
E1 (ERROR 1):
When the machine starts but computer could not read the signal from sensor for 7 seconds, E1 will be
shown on the computer.
E6 (ERROR 6):
When the machine starts but computer could not read the VR signal from incline motor for 6 seconds,
E6 will be shown on the computer.
If any above trouble happens, please consult the distributor.
E3 (ERROR 3):
It happens only in HRC mode (H1, H2, or H3) when user’s heart rate is 20 beats more than target
heart rate and last for over 30 seconds. For your safety, you should stop running when E3 appears.
SMELL
If any smell comes out from motor, please firstly spray out some silicone on the running board (Please
refer to page: RUNNING BOARD MAINTENANCE), and see if the situation improves. Then consult
the distributor for necessary help.
There is an ASA system (Adjustable Shock Absorbing system) installed on two side s of
main frame. By turning the knob, user can change shock intensity from soft (1)
(decrease 60%) to Firm (5) (decrease 20%). Do not adjust it when some one is running
on the machine.
HOW TO USE ASA (ADJUSTABLE SHOCK-ABSORBING) SYSTEM
13