Do Žlábku 733, 514 01 Jilemnice
Subject:
MTP Technical documentation
Page No./No. of pages:
10/20
- the outdoor design with IP 43 electrical protection is designed for outdoor
environment. The burner and the triple thermostat are provided with appropriate
covers to protect these devices against atmospheric precipitation.
- with this design, prevention of the possibility of sucking up coarse dirt (e.g. leaves
from trees).
c) no flammable materials can be stored in the area of the air heater - fire hazard!!!
The heater interference suppression corresponds to ČSN 334200.
d) if the air heater is supplied in a design without the fan or without electrical
installation and MaR system, it is necessary to ensure their connection and
installation according to the applicable standards for gas equipment, thus in
particular 2016/426.
7. Technical supervision and inspection
Technical supervision and inspection during production as well as acceptance are
performed by the technical committee of the manufacturer.
Furthermore, the manufacturer reserves participation of their representative in
putting the heater into service as the warranty condition.
8. Marking
On each heater there is a non-removable label that contains:
a)
manufacturerʼs designation
b)
product identification number
c)
type designation
d)
serial number
e)
year of production
f)
nominal heat input (kW)
g)
nominal heat output (kW)
h)
nominal air flow (m
3
/h)
i)
external air pressure (Pa)
j)
nominal electrical input (kW)
k)
weight (kg)
l)
voltage system (3x400 V + N + PE 50 Hz)
m)
protection
n)
destination country
In addition, on each heat exchanger unit there is a label with the following text:
“This heater must be in
stalled in accordance with the applicable instructions and its use is
permitted only in a well-ventilated area. Please read the instructions before installing and
using it.”
