Error Message
Description
Suggestion
Error 123
Autotest failed
(only in Italy)
1.Restart inverter.
2.Please contact Jinko service center if restart
can't solve the problem.
PV Isolation
Low
PV isolation too low
1.Check the connection of PV panels and
2.inverter is good or not.
Check the PE of inverter is good or not.
OP Short
Fault!
EPS Output Short Fault
1.Check the load of EPS.
2.Check the output of EPS. Especial not
connect to grid
NTC Open
Internal temperature
failed
1.Please contact Jinko service center
Error 406
Model set up not meet
with certification
1.Please check model set or check the DIP
setting
Residual I High Leakage current too
high
1.Check the cable of inverter.
Restart inverter.
2.Please contact Jinko service center if restart
can't solve the problem
Error 408
Temperature over
range
1.Please check the temperature is in the range
of specification or not.
PV Voltage
High
PV voltage higher than
datasheet
1.Please check the voltage of PV input is in the
range of specification or not.
10
Manufacturer Warranty
This certificate represents a 10 year warranty for the Jinko products listed below.
Possession of this certificate validates a standard factory warranty of 10 years from the
date of purchase.
Warranted products
This warranty is applicable solely to the following products:
l
JKS-3HLVS-ABI
l
JKS-3.6HLVS-ABI
l
JKS-4HLVS-ABI
l
JKS-4.6HLVS-ABI
l
JKS-5HLVS-ABI
l
JKS-6HLVS-ABI
Limited Product Warranty
(for normal application, installation, use and service conditions) Jinko warrants that the
Products will be free from defects and/or malfunctions for a period of 5 or 10 years not
exceeding the date of sale as indicated in the original Buyer's Certificate of Purchase.(5
or 10 years is optional)
The warranties described in these “Limited Warranty” are exclusive and are expressly in
lieu of and exclude all other warranties, whether written, oral, expresser implied,
including but not limited to, warranties of merchantability and of fitness for a particular
purpose, use, or application, and all other obligations or liabilities on the part of Jinko ,
unless such other obligations or liabilities are expressly agreed to it in writing signed and
approved by Jinko , Jinko shall have no responsibility or liability whatsoever for damage
or injury to persons or property, or for other loss or injury resulting from any cause
whatsoever arising out of or related to the modules, including, without limitation, any
defects in the modules or from use or installation. Under no circumstances shall Jinko be
liable for incidental, consequential or special damages howsoever caused; loss of use,
loss of production, loss of revenues are therefore specifically and without limitation
excluded to the extent legally permissible, Jinko's aggregate liability, if any, in damages
or otherwise, shall not exceed the invoice as paid by the customer.
The “
Limited Product Warranty
” described above shall not apply to, and Jinko shall
have no obligation of any kind whatsoever with respect to, any machine which has been
subjected to:
l
Misuse, abuse, neglect or accident;
l
Alteration, improper installation or application;
l
Unauthorized modification or attempted repairs;Insufficient ventilation of the
product;
l
Transport damage;
l
Breaking of the original manufacturers seal;
l
Non-observance of Jinko installation and maintenance instruction;
l
Failure to observe the applicable safety regulations
l
Power failure surges, lighting, flood, fire, exposure to incorrect use, negligence,
accident, force majeure, explosion, terrorist act, vandalism or damage caused by
incorrect installation, modification or extreme weather conditions or other
circumstances not reasonably attributable to Jinko.
The warranty shall also cease to apply if the product cannot be correctly identified as the
product of Jinko. Warranty claims will not be honored if the type of serial number on the
machines have been altered, removed or rendered illegible.
59
60
