10
Similar to the traditional inverter connecting, the input of PV panel energy can be
realized by using MC4 PV terminal, the detail steps are as follows:
1.Turn off PV switch.
2.Insert PV panel positive and negative cables into MC4 terminal, then connect positive
pole(+) of connection cable to positive pole(+) of PV input connector, connect negative
pole(-) of connection cable to negative pole(-)of PV input connector, please pay attention
to PV input voltage and current within permission
Limit:
Max PV voltage: 550V (consider the lowest temperature)
Max PV input current: 13.5A
Max PV input power per string: 5300W
Remark:
2
1.We suggest you use the cable
≥
4mm /12 AWG to connect.
2.Please do not connect to DC source!
5.4.3
Connection of AC Terminal and Off Grid Terminal
JKS has a grid output terminal and off grid out terminal, look down on the JKS from the
front, the terminal on the left (on grid) is grid outlet for connecting grid, the terminal on
the right is an emergency power outlet for connecting critical load.
Chart 5.10 JKS-3~6HLVS-ABI
Wire suggest length
Conductor
cross section
Max cable length
JKS-3HLVS
-ABI
JKS-3.6HLVS
-ABI
JKS-4HLVS
-ABI
JKS-4.6HLVS
-ABI
JKS-5HLVS
-ABI
JKS-6HLVS
-ABI
2
5.2mm
10AWG
40m
33m
28m
26m
25m
23m
2
6.6mm
9AWG
50m
42m
36m
33m
32m
29m
Chart 5.11
Step 2: Insert the stripped and bared cable through pressure screw, seal ring, threaded
sleeve in sequence, insert cables into connection terminal according to polarities
indicates on it and tighten the screws firmly. Please try to pull out the wire to make sure
the it's well connected.
The AC wiring step:
Chart 5.12
Step 1. Uninstall the parts of the AC connection plug from the accessory bag.
22
21
OFF
Grid
ON
Grid
Connection
termimal
Threaded
sleeve
Seal ring
Pressure
screw
Connection
termimal
Pressure
screw
Seal ring and
Threaded sleeve
Connection
termimal
Pressure
screw
Seal ring and
Threaded sleeve
10
