background image

Battery assembly and replacement

Do not treat electrical appliances as unclassified municipal waste, use separate collection facilities. For 
information on available collection systems, contact your local government.

Do not remove the lithium battery without authorization.
When removing the lithium battery from the vacuum device, please remove the ring, bracelet, necklace and 
watch.
The short-circuit current generated by a battery is enough to adsorb the ring (or similar items), causing severe 
burns.
Before removing the battery pack, please wear eye protection cover, gloves and protective clothing.
Be careful not to touch the wire or any metal parts, or it will cause spark or short circuit.
Do not smoke, spark or flame near the cleaner, or it will ignite the battery and produce gas.
Avoid exposing the battery to fire or high temperature, otherwise it may cause explosion.

Warning!

6

Note!

In case of battery leakage, avoid contact with the damaged battery and put it in a plastic bag.
If skin or clothing is in contact with acid, wash immediately with plenty of soap and water.
If the eyes are in contact with acid, rinse the eyes with water for at least 15 minutes and send them to a doctor 
for treatment.

Battery replacement

1.Pull out the four clips of the core part of the upper cover outward and separate it from the body assembly of the bottom cover.

3. Open the battery cover, find the 

battery connection line, press the 

clip on the connector, pull it out, and 

take out the battery.

Note: wrap the connector with 

insulating tape immediately to avoid 

short circuit caused by contact 

between two wire terminals.

4. According to the disassembly steps, re install the battery and assemble the charging parts.

Note: (1) if there are impurities in the seal ring, clean it and install it back into the seal ring groove.    

          (2) Pay attention to the assembly direction. The six screw holes must be aligned to lock the screws.

2. Use a screwdriver to 

remove all screws on the 

power cover of the 

bottom cover.

NOTE: User must consult dealer before any battery replacement.

Содержание Aquajack 600










Отзывы: