1-4
MEPU13032504
G
E
R
M
A
N
E
N
G
L
I
S
H
F
R
E
N
C
H
D
U
T
C
H
INSTALLATION
Only qualified, licensed electrician or contractors should install pump and wiring.
Pump Mount Must:
NOTICE:
Pump suction and discharge connections have moulded in thread stops,
DO NOT
try to screw
pipe in beyond these stops.
4
4
Allow use of short, direct suction pipe. (To reduce friction losses & do not install the
pump at more than 3M geometrical
height from water level)
4
Flowgates should be used in suction and discharge piping.
4
Have adequate floor drainage to prevent flooding.
4
Be protected from excess moisture.
4
All adequate access for pump and piping servicing.
Be solid, level, rigid and free from vibration.
SS Pool Spa Pump
Installation & Operating Instructions
&
IMPORTANT ELECTRICAL
Electrical Contractors Please Note: EMAUX pumps must be wired to the
main power
supply through an approved and correctly rated contactor.
