4
1.
3.
2.
4.
5.
Power on
When the robot has no power, it will automatically stop at the edge of the pool.(may also get stuck in the
middle of the pool by obstacles)
1.
2.
3.
Turn on the switch, loosen the rope on the float,
put the robot horizontally into the pool, and wait
for the robot to sink freely to the bottom. (if the
product is not put into the water, the machine will
not rotate because the machine has the function of
"stop when leaving water").
Adjust the length of the rope to ensure that
the length of the rope is at the same height as
the water level, and the extra length of the
rope is tied or cut short.
Open this place, you
can carry it by hand,
and take out the robot
easily
Garbage disposal
Note: 1. It is recommended to turn off the filtration system as the water circulation in the pool may affect the
robot's motion mode.
2. Any obstacle in the swimming pool will affect the robot's crawling and cleaning track, such as ladder;
3. If you are using a brine tank, make sure that all the salt is dissolved before putting the robot into the water.
