JR Flexo Label Printing Machine Series
6
used to print large trademark (180mm
ⅹ
350mm) with high quality and good coloring
effect.
It is easy to use and quick to adjust. A single operator can finish the adjustment of a
4-color machine within minutes, and the thickness of the material to be printed ranges from
0.1 to 0.5mm. Multiple colors can be printed when the material passes the machine once,
with the maximum printing area being 180mm
ⅹ
350mm and the horizontal and vertical
registering control within ±5mm, quick and easy.
Registering error:
The registering accuracy is ±0.1m±0.1mm. The thickness of a typical flexographic
plate of the trademark printer is 1.7mm.
5. Folding part:
The JR-242 flexographic plate printer is configured with a paper rolling axle, the
maximum rolling diameter is Φ16
(
400mm
)
.
6. Operating box:
The operating box is made of the following devices: PVC, ON switch, OFF switch,
inch switch and speed-adjusting switch.
7. Transmission and power requirement
The JR-242 flexographic plate printer is configured with AC motor, speed-up and
speed-down control, which enables the speed of trademark printing to change from 5
meters per minute to 60 meters per minute. The power requirement is 220V, 50/60 Hz, 3
phases, 4.7KW.
8. Configuration list
Name
Name
Name
Name
Qty.
Qty.
Qty.
Qty.
Ceramic anilox roller 700/min or 280/min
4
Ceramic anilox roller 400/min or 200/min
1
Outer-form printing seat
4
Inner-form printing seat
2
Infrared dryer
4
Heating plate
2
Printing cylinder
1
Optional accessories
Name
Name
Name
Name
Qty
Qty
Qty
Qty
Printing cylinder
Based on reduction rate statistics