Jinan USR IOT Technology WIFI232-A, Руководство пользователя

Страница: 86 / 93

USR-WIFI232-A/B/C User Manual http://www.usriot.com
Jinan USR IOT Technology Limited Page 86 of 93 tec@usr.cn
� Protocol: UDP
�
No Server/Client selection required;
�
Application IP address required: it’s target device ‘s IP address;
� Port ID required: 8899 (Default)
Figure 64
Module Module Module Module Network Network Network Network Protocol: Protocol: Protocol: Protocol: UDP UDP UDP UDP
Q5: Q5: Q5: Q5: How How How How to to to to configure configure configure configure transparent transparent transparent transparent serial serial serial serial port port port port application: application: application: application: Two Two Two Two WIFI WIFI WIFI WIFI
modules
modules
modules modules all
all
all all configured
configured
configured configured as
as
as as STA
STA
STA STA and
and
and and connection
connection
connection connection through
through
through through AP?
AP?
AP? AP?
�
Network structure as below figure:
�
Module 1# Setting: ( We use USR-WIFI232-A/B/C as AP for this example)
� Works as AP mode and all default setting;
�
Module 2# Setting:
� Works as STA mode; --See “Mode Selection Page”
�
WAN connection type: Static IP: 10.10.100.100;
--See “STA Interface Setting Page”
� Network Protocal:TCP/Server, Port ID: 8899; -- See “Application Setting Page”
�
LAN IP address: 10.10.99.254 (Different net segment with WAN port);
--See “AP Interface Setting Page”
� Module 3# Setting:
�
Works as STA mode; --See “Mode Selection Page”
� WAN connection type: Static IP: 10.10.100.101; --See “STA Interface Setting Page”
�
Network Protocal:TCP/Client, Port ID: 8899; Application IP address: Module 2#’s WAN
IP address (10.10.100.100); -- See “Application Setting Page”
�
LAN IP address: 10.10.98.254 (Different net segment with WAN port);
--See “AP Interface Setting Page”